Hi,
I am trying to interface a tc35i gsm module .
As datasheet I connected:
1-5 -> BAT+
6-10 -> GND
18(RXD0) -> max232 (12-R1Out)
19(TXD0) -> max232 (11-T1IN)
and IGT to a circuit which trying to turn on the tc35i.
But I cant get anything hyper terminal.
When I set baud rate on hyper terminal to 115200 I and when I type I see something which is not correct for example when I type A I see H as echo.
I would appreciate if you can help me.
I am trying to interface a tc35i gsm module .
As datasheet I connected:
1-5 -> BAT+
6-10 -> GND
18(RXD0) -> max232 (12-R1Out)
19(TXD0) -> max232 (11-T1IN)
and IGT to a circuit which trying to turn on the tc35i.
But I cant get anything hyper terminal.
When I set baud rate on hyper terminal to 115200 I and when I type I see something which is not correct for example when I type A I see H as echo.
I would appreciate if you can help me.