Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

increasing a signal voltage with 1 volt.

Status
Not open for further replies.

John23

New Member
Hey guys!

I have a problem with a signal that im going to sample.

Its a DC voltage that varies between -0.7 and 1.7 volt like a spike and lies around 0 volt between the spikes, and i have to increase the voltage by 1.5 volt.
Without destroying the old signal, simply just lift the entire signal.

I need a high impedance on the signal input.
My suply voltage is 12 volts.

Anyone got any good ideas on how to do this?

Regards: John
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top