Include bas extension to be iHex

[mini]

Can I add the include bas files to main bas to be ihex.
Example :

Define CONF_WORD = 0x3f41
Define CLOCK_FREQUENCY = 4

'#Processor PIC16F628A
AllDigital

TRISA = %11111011
TRISB = %00000000

PORTB.7 = 1  'LED on PORTB is On

'Declaration
Dim ledIndicator As Byte

'LCD 2x16
Define LCD_LINES = 2
Define LCD_CHARS = 16
Define LCD_BITS = 4
Define LCD_DREG = PORTB
Define LCD_DBIT = 0
Define LCD_RSREG = PORTA
Define LCD_RSBIT = 2
Define LCD_EREG = PORTA
Define LCD_EBIT = 3
Lcdinit 0


'Show First Time On LCD
Lcdcmdout LcdLine1Pos(1)
Lcdout "PCB Etching"  'First Line
Lcdcmdout LcdLine2Pos(1)
Lcdout "Mini Osh"  'Second Line

Above pieces code I did compiled to be iHex format, then this iHex I add as an include files as Include.iHex or something like #include <built_in.h>

Thanks,
Mini.

 

[DogFlu66]

According to the manual, up to the current version, it only allows uncompiled source files of the following types:

Include "File.bas" and IncludeASM "File.asm".

 

[mini]

According to the manual, up to the current version, it only allows uncompiled source files of the following types:

Include "File.bas" and IncludeASM "File.asm".

DogFlu66,
Well okay.

Thanks,
Mini.