Inchworm+ ICD2 assembly question

Status
Not open for further replies.
D

danuke

New Member
I have received my inchworm+ kit and noticed that in the assembly instructions located at: **broken link removed** it lists C12 as being a 10uF 16V electrolytic capacitor. However, on the parts list that came with the kit, it has C12 as being a 22uF 63V capacitor. I ordered the kit from dipmicro.com and was wondering if the values would affect the programmer. If so which one is correct?

Thanks,
Joe
 
I assembled mine with the 22uF and it works perfect. All the DipMicro substitutions are fine. I used em all and my Inchworm+ works great. Just go by the DipMicro parts list on the sheet the bags were stapled to.
**broken link removed**
 
Last edited:
Status
Not open for further replies.

Similar threads

B
  • Question
Temperature controlled fan using PIC16F877a (in assembly language)
Replies
6
Views
1K
Dan Soze
D
A
  • Question
Timing conundrum - PIC Assembly
Replies
9
Views
2K
augustinetez
A
P
  • Question
Beaglebone cape question
Replies
2
Views
2K
atferrari
  • Question
16-bit multiplication in Assembly
Replies
12
Views
2K
Peet19
  • Solved
Division by a fraction in assembly
Replies
14
Views
2K
Peet19
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…