If it's a simple circuit, I might just solder it onto a perf board. but It's super easy to just breadboard it really quick.
If it's a complex circuit, (involving many components) I definitly breadboard it.
Arr I cant stand breadboard (by breadboard you mean the white plastic boards that you can plug components into).
They are soo noisy. I tend to go straight for Veroboard. If it is a complex cct plan it out a bit and build up in stages testing as going along (if possible)
Yes, definatly depends on the type of circuit. If it includes frequencies over 10MHz, normal breadboards can't handle them. If the circuit is prone to noise, don't use breadboards at all.
Yes, definatly depends on the type of circuit. If it includes frequencies over 10MHz, normal breadboards can't handle them. If the circuit is prone to noise, don't use breadboards at all.
no, you can use a breadboard provided that u do the layout very carefully (which is not an easy thing). but usually its better to use a veroboard. i believe that you are going to start with Nigel's tutorials. well, in that case Nigel has made all the layouts for the boards and u can easily build them on a veroboard. i would say that it would be better if you follow the layouts in Nigel's tutorials