How to read Device ID w/PICKIT2 App?

Hi guys,

Is there a way to read the Device ID with the PICKit2 stand-alone programmer application?

TIA...

Cheerful regards, Mike

I am not sure which of the two non MPLAB apps you are thinking about.

if you are talking about the command line interface

-I shows device name (only looked at pickit2cmd.exe
The -I command now displays the device name associated with the read
Device ID, and warns if it is different from the selected device.

Click to expand...

If you are talking about the pickit2.exe and pickit3.exe apps the device is listed near the top of the IDE but you have to manually select the family of parts.

Mike you have to use the pk2cmd.exe to do this you can get it here https://ww1.microchip.com/downloads/en/DeviceDoc/PK2CMDv1-20.zip

Open the Cmd and cd to that file and run the pk2 with this pk2cmd.exe -P -I and you'll get what your looking for look at attached Thumbnail

Thanks guys. I'm disappointed that there's no way to see the device ID within the stand alone programmer app'.

Regards, Mike