How to introduce a jumper in single layer PCB design in Proteous.

Status
Not open for further replies.

Qaisar Azeemi

Member
HI;

I am using Proteus7.1 sp2 for my PCB design; i can't find any jumper in its library. i want to include 1 inch or greater jumpers in my design/layout to prevent cross wiring and overlapping. can any one please guide me about that?

Thank you
 
yes we can and another solution is also to make top layer and then use it as jumper but i want to know about any built in option for jumper in the proteous software or in any other software???
 
Its called a link and there are various sizes. If you are using shorting links, then a two way sil does the job... when you select component... just type "link" into the search at the top.
 
just right click on a link and decompose.... adjust the components and click package....
 
Another problem is the PCB mounted Transformers are not present in the liabrary of Proteus. how can i make it in specific sizes. i want to make one of 220V/12V 150mA transformer to design it in PCB.
 
Is it such a big problem to read the manual and make your own symbol and package?
 
NVM found my answer I'll post some pictures for everyone who may have the same issue
 
Last edited:
Status
Not open for further replies.

Similar threads

S
Via-in-Pad in PCB Design
Replies
9
Views
2K
rjenkinsgb
O
  • Question
PCB design verification
Replies
12
Views
6K
For The Popcorn
F
F
  • Question
How to make a capacitance variable with voltage in LTpice?
Replies
4
Views
5K
Roff
R
  • Question
How to use Vias in Altium Designer to design PCB?
Replies
13
Views
5K
R_ZH
R
F
  • Question
PCB primary to secondary clearance on different internal layers?
Replies
1
Views
3K
ChrisP58
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…