Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

How to fix this scope?

Status
Not open for further replies.
Sound like a loose or dirty internal connector or buss connector problem.

I would remove cabinet, pull out cards, clean edge connectors with alcohol or
contact cleaner, and reseat for starters.

Any dip packages in sockets, carefully pry up a little each end and reseat by pushing
down on them back into socket. You don't have to pull all the way out, like just 1/8" movement.
That helps wipe the contacts again.

Regards, Dana.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top