Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

How do I program the microcontroller?

Status
Not open for further replies.
I would suggest you to go for 89s51, as it has ISP (In System Programming)
which means you don't need external/separate programmer.

You can use parallel port. Make connections as below
============================
Printer Port Pins - Microcontroller pins
============================
6 (D4) ---------- 9 Reset
7 (D5) ---------- 6 (P1.5 -MOSI)
8 (D6) ---------- 8 (P1.7 - SCK)
10 (ACK) ------- 7 (P1.6 - MISO)
18-25 (GND) --- 20 (GND)
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top