Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

How can I place components on both sides of my PCB in EasyEDA?

Status
Not open for further replies.

Sashvat

Member
Hi guys, I have designed a Microcontrollers development board and I want to be able to keep components (the Capacitors and resistors) on both sides, the top and bottom side of the PCB to reduce the overall size of the PCB. I have designed this PCB on EasyEDA. How do I do this?

Thank you.
 
How to put a component on the bottom layer?
There are two ways to do this.


  1. If your active layer is the bottom layer, then every component you place will be placed on the bottom layer automatically.
  2. You can place a component then select it and change its layer attribute to Bottom layer in the right hand panel.
    309_FAQ_FootprintTopToBottom.png
 
How to put a component on the bottom layer?
There are two ways to do this.


  1. If your active layer is the bottom layer, then every component you place will be placed on the bottom layer automatically.
  2. You can place a component then select it and change its layer attribute to Bottom layer in the right hand panel.
    309_FAQ_FootprintTopToBottom.png

ok, so I select the component and in component attributes, I select Top layer and Bottom Layer under layers correct?
 
How to put a component on the bottom layer?
There are two ways to do this.


  1. If your active layer is the bottom layer, then every component you place will be placed on the bottom layer automatically.
  2. You can place a component then select it and change its layer attribute to Bottom layer in the right hand panel.
    309_FAQ_FootprintTopToBottom.png
ok, thanks a lot I got it!
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top