Don't forget to invert the digit drive signals as well if it is a multiplexed display. If the cathodes are driven with NPN transistors with the emitters to ground then these will need to be changed to PNP transistors with the emitters connected to Vcc.
You need to provide the ORIGINAL schematic of how it was designed for common cathode and ALSO how you have connected the common anode LEDs. You would not just decide to replace an NPN transistor with a PNP one just because you had one. (I hope.)
You need to provide the ORIGINAL schematic of how it was designed for common cathode and ALSO how you have connected the common anode LEDs. You would not just decide to replace an NPN transistor with a PNP one just because you had one. (I hope.)