Project 1:
I want to design a circuit that takes an analog input into a 7106 or 7107 and read the output on a LED 7 segment
Project 2:
I want to design a circuit that is fed with pulses. the pulses are to be counted and the output is showed on three 7 segments that to be multiplexed together
I know they are both easy project, but I need help
thanks alot in advance
Project 1:
I want to design a circuit that takes an analog input into a 7106 or 7107 and read the output on a LED 7 segment
Project 2:
I want to design a circuit that is fed with pulses. the pulses are to be counted and the output is showed on three 7 segments that to be multiplexed together
I know they are both easy project, but I need help
thanks alot in advance
for the counter, I want with every pulse, the numbers in the 7-segments to be incremented, to go from 0 till 999 as the circuit will be used for other applications later, just have to do the counter now with the pulses and multiplexed for the segments
and for the 7107 I cant seem to get it from the data sheet :s
for the counter, I want with every pulse, the numbers in the 7-segments to be incremented, to go from 0 till 999 as the circuit will be used for other applications later, just have to do the counter now with the pulses and multiplexed for the segments
and for the 7107 I cant seem to get it from the data sheet :s
in the part of typical application, the IC connection is shown only the half of the IC, i cant connect the other part (sorry for that, I just never had to design with ICs that I didnt know before)
in the part of typical application, the IC connection is shown only the half of the IC, i cant connect the other part (sorry for that, I just never had to design with ICs that I didnt know before)
in the part of typical application, the IC connection is shown only the half of the IC, i cant connect the other part (sorry for that, I just never had to design with ICs that I didnt know before)