Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You mean like this? Seriously, though, put some more effort into your post, if at least by providing more detail about what you need, and you'll be more inclined to get the answers you're looking for. We're not a custom robot-hand building business, but if you offer how much you're willing to pay, you might find takers. If you're looking for free advice, you get what you give and then some, so it's still a good deal.poorak said:The arm should be self-made...
That doesn't make any sense, power is measured in Watts which is volts times amps so saying the maximum power used is 24V is totally meaningless.poorak said:24V maximum power used in the machine
Yes, it's the stall current but it's opposite to the no load current, it's the maximum current when it's overloaded.xheavenlyx said:Oh yeah, the armature reading (resistance & / by V ) will just give the current at NOLOAD. Which is the stall current rite?
Just measure the current when the load that you intend to use is connected.So, for proper tests is it advisable to measure the current by ser ammeter (low power) and varying the load and noting down the current and hence power consumed at each load level. By this we can check for different voltages (12,24 etc) and get the best efficiency?