Hi all
I'am trying to switch the outputs from a audio filter to a common input (audio amp) using analogue switch's (TS5A3157DBVR)
Here is the circuit:
For some strange reason the +5v from the reg (ic3) drops to about 1.7v, but when i remove sw1 to sw4 the voltage is +5v
so it looks like there is a problem with the analogue switch's, but i have no idea as to what it might be.
Here is a link to the data sheet
**broken link removed**
Hope that someone can help me with this
Thanks
hamopp
I'am trying to switch the outputs from a audio filter to a common input (audio amp) using analogue switch's (TS5A3157DBVR)
Here is the circuit:
For some strange reason the +5v from the reg (ic3) drops to about 1.7v, but when i remove sw1 to sw4 the voltage is +5v
so it looks like there is a problem with the analogue switch's, but i have no idea as to what it might be.
Here is a link to the data sheet
**broken link removed**
Hope that someone can help me with this
Thanks
hamopp