Hi all,
I'm a newbie in electronics... so i really need your help.
Now from the pics attached prob. should be clear on my desired ooutput.
What i want to do is, when i ON my car parking light, it will then ON also my signal (fender) light. But when i activate my signal lights (blinks), the signal will alternate the fender light ON / OFF and when i deactivate the signal, it will remain ON (provided my parking light is still ON).
I'm not sure whether can this work? Also, what's the purpose of;
1. Vdd
2. Vss
on the chip?
I tried to have it power via an adaptor but it seems that it shows the signal out of pin#3 voltage even if pin#1 and pin#2 has signal of 6Vdc. However, the output shows 3Vdc on pin#3. The -ve i connect directly to -ve terminal of my multimeter while the +ve to pin #1 and loop to pin #2 for testing. Pin#3 is connected to +ve terminal on the multimeter.
When i short the 6Vdc on pin#1 and pin#2, output on pin#3 still shows a power of 3Vdc.
Pls. help.
Thanks a million.
Rgds.
Edwin.
I'm a newbie in electronics... so i really need your help.
Now from the pics attached prob. should be clear on my desired ooutput.
What i want to do is, when i ON my car parking light, it will then ON also my signal (fender) light. But when i activate my signal lights (blinks), the signal will alternate the fender light ON / OFF and when i deactivate the signal, it will remain ON (provided my parking light is still ON).
I'm not sure whether can this work? Also, what's the purpose of;
1. Vdd
2. Vss
on the chip?
I tried to have it power via an adaptor but it seems that it shows the signal out of pin#3 voltage even if pin#1 and pin#2 has signal of 6Vdc. However, the output shows 3Vdc on pin#3. The -ve i connect directly to -ve terminal of my multimeter while the +ve to pin #1 and loop to pin #2 for testing. Pin#3 is connected to +ve terminal on the multimeter.
When i short the 6Vdc on pin#1 and pin#2, output on pin#3 still shows a power of 3Vdc.
Pls. help.
Thanks a million.
Rgds.
Edwin.