Merry Christmas! Over the Christmas Break (for School) I will be working on my giant Coil Gun! I had to build 2 support towers on either side to hold it, and It is a 1 degree of freedom Aimable gun.
Since I'm learning Swordfish BASIC SE here you go https://www.sfcompiler.co.uk/swordfish/ **broken link removed** Unicorns LCD using the Oshonsoft 18F simulator
Code:
{
*****************************************************************************
* Name : Christmas.BAS *
* Author : William Richardson *
* Notice : Copyright (c) 2007 blueroomelectronics *
* : All Rights Reserved *
* Date : 12/21/2007 *
* Version : 1.0 Swordfish BASIC SE *
* Notes : Have a Merry Christmas and Happy New Year *
* : blueroomelectronics Unicorn 18F4550 with 2x16 LCD *
*****************************************************************************
}
Device = 18F4550
Clock = 1
Config FOSC = INTOSC_HS, LVP = OFF // Use the Internal Oscillator
#option LCD_DATA = PORTD // Assign the LCD connections
#option LCD_EN = PORTE.2
#option LCD_RS = PORTE.0
#option LCD_RW = PORTE.1
Include "LCD.bas"
Include "utils.bas"
OSCCON = $42 // 1MHz internal OSC
SetAllDigital // Make all pins digital I/O's
High(PORTB.3) // Turn on the LCD backlight
DelayMS(150)
Cls // Clear the LCD screen
DelayMS(50)
WriteAt(1,1,"Merry Christmas ")
WriteAt(2,1,"& Happy New Year")
End
Nadolig Llawen a Blwyddyn Newydd Dda - Merry Christmas and a Happy New Year!
I'm going to be busy writing code for an RC5 receive circuit. I'm looking forward to the time off work so that I can get a good chunk of it done actually!
Nadolig Llawen a Blwyddyn Newydd Dda - Merry Christmas and a Happy New Year!
I'm going to be busy writing code for an RC5 receive circuit. I'm looking forward to the time off work so that I can get a good chunk of it done actually!
Merry Christmas to all! (And a Happy Holidays to those that don't celebrate Christmas!)
I was reading over the posts above and grinning -- because I was thinking the same thing -- you know you're addicted when the Christmas holidays means time off to program!
Merry Christmas And a Happy NewYear To you from Estonia
I see a lot of you are using the little break for your programming/projects or whatever and i am also building my little coilgun (school break) and thats why i asked for the XOR gate. I just want to build it from scratch to learn and learn and learn.
I am working on learning Java, and then on wednessday (day after xmas) i am going to purchase 2 22" lcds for my computer. Dual 22" monitors! I can't wait!
Buddhism is very generous concerning other religions and religious holidays. We even have a christian church (including a bell) in town and a huge crucifix in front of it. I celebrate more holidays than you are allowed, the christian and the buddhist holidays.
I've already considered working as a buddhist monk for three years and one day without converting to buddhism. (again generousity) That way I will get a permanent residence permit with all the privileges Thais have (purchase own land and own house). The permit has to be renewed every year for foreigners other than asians.
Once again, merry christmas and a happy new year. Also greetings from Ante (Anders)