emrahdemirtekin
New Member
I want to(or have to) design a simple circuit which enables two person to communicate within 10 meters. There must be only two wires between A and B terminals.We are just allowed to use simple electronic components(diodes,leds,transistors,resistance,battery and capacitors).Speed of data transfer is so important (speed means higher grades)
I designed a circuit (shown below) which depends on voltage change.By changing voltage i can change the number of flashing lamps.But i don't think that circuit is so suitable for my project because at max. voltage power across lamp 2 is about 18 watt which is 12 times greater than 1.5 Watt.Therfore lamp 2 is likely to fail.
**broken link removed**
I want to get your valuable ideas.
Thanks for your consideration.
emrahdemirtekin@hotmail.com
I designed a circuit (shown below) which depends on voltage change.By changing voltage i can change the number of flashing lamps.But i don't think that circuit is so suitable for my project because at max. voltage power across lamp 2 is about 18 watt which is 12 times greater than 1.5 Watt.Therfore lamp 2 is likely to fail.
**broken link removed**
I want to get your valuable ideas.
Thanks for your consideration.
emrahdemirtekin@hotmail.com