finding partnumber for cap & ind

Status
Not open for further replies.

shermaine

New Member
Hello,

Any one has the part number for non-polarised capacitor 1UF 200V or 300V, inductor 47UH 3 or 4A and another non-polarised capacitor 539UF 200V.
Pls advise me the part number and the datasheet.
Thanks so much.

shermaine
 
shermaine said:
Hello,

Any one has the part number for non-polarised capacitor 1UF 200V or 300V, inductor 47UH 3 or 4A and another non-polarised capacitor 539UF 200V.
Pls advise me the part number and the datasheet.
Thanks so much.

shermaine

You're not going to find a 539uF capacitor, for a start tolerances are likely to be either 5% or 10% - plus for a tuned circuit you will need a non-polarised capacitor, and you don't get many of those much bigger that 1uF.

Also it wouldn't be a good tuned circuit, the inductance is much too low, and the capacitance much too high - try starting with a capacitor of 1uF and see what coil you need then.
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…