Recently a very old vector analyzer I use at my university has finally had it's very old lithium ion battery die. After speaking with the company that made the analyzer they have informed be since the unit is so old that they do not have that battery in stock and also couldn't tell me a source of where to buy it. Attached is a picture of the battery on the PCB. Does it look remotely familiar to anyone? Any help to point me in the right direction would be greatly appreciated.
If anyone is wondering this is the A9 PCB on a very old Anritsu 327269B VNA.
If you have plenty of space available in the analyzer and you know what the battery voltage should be you could use almost any battery of a suitable voltage and type. I had the same problem with a dead 3.6V lithium battery in a 'scope. I replaced it with 3 AA alkaline cells and a primitive voltage regulator.
I know this will sound naive but is there easy way to determine the voltage of the battery if it is dead? Also how technical of a task would it be to do as you're suggesting with using a voltage regulator and some AAs. I assume some soldering skills are a necessity?
Googling for the part number (if it has one) may yield some useful info re the battery. Failing that, you could contact the company again and ask them.
Also how technical of a task would it be to do as you're suggesting with using a voltage regulator and some AAs. I assume some soldering skills are a necessity?
I mis-remembered the circuit I used. It was a voltage dropper rather than a regulator as such. But it does the job adequately, as you can see from the attached:
Is it a through hole battery? Can you see the layout of the pins? Can you identify which is the ground pin? Is the case soft plastic that might hold a standard battery inside? Can you trace the circuit?
Could any of these be a replacement, the first one looks about the right size (0.6" x 0.6").
I was able to peel off the label with a razor blade, its a standard lithium battery from rayovac. Obsolete but some places still carry it and was able to order another. Thanks for the help everyone.