Eusart

will any 1 help me in writing c code for Eusart communication with pc using hyper link my code is dis but its not working like i want to display what i typed in my pc keyboard on 16*2 LCD pleas help me


/********************************************************************************************************************
Counter On Each Interrupt
Interrupt Pin Assign to RB0
Data Lines aer connected to port D D0 - D7
E = RE2
RS = RE0
RW = RE1
CONTROLLER USED PIC16F887
*******************************************************************************************************************/
#include <pic.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>

__CONFIG (FOSC_INTRC_NOCLKOUT & WDTE_OFF & PWRTE_ON & MCLRE_ON & CP_ON & BOREN_ON & IESO_OFF & FCMEN_OFF & DEBUG_OFF);

#define PORTBIT(adr, bit) ((unsigned)(&adr)*8+(bit))

static bit RW @ PORTBIT(PORTE, 1);
static bit RS @ PORTBIT(PORTE, 0);
static bit ENA @ PORTBIT(PORTE, 2);
/***InitiallizeAll***/
void LCDDelay(unsigned int Delay);
void LCD_Display(void);
void InitialiseAll(void);
void clear_display(void);
void LCD_Initialliz(void);
void Nibble_seperat(void);
void debounce(void);


unsigned char Message1[17];
unsigned char Message2[17];
//void InitialiseAll(void);
unsigned char delaycount;
unsigned int i,J,K;
unsigned int Flag_1;
unsigned int DelayCount;
unsigned int num;
unsigned int temp;
unsigned int temp1;
unsigned int count;
unsigned int Int_Flag;
unsigned int a;
unsigned int Adc_Value;
unsigned int value;
unsigned int value1;
unsigned int b;
float t;




union abc
{
int count;
int Byte[2];
};
union abc ADC;


void main()
{

InitialiseAll();
LCD_Initialliz();
strcpy(Message1,"Degre Centigrade");
strcpy(Message2," C ");
LCD_Display();


for(i=0;i<65500;i++);
for(i=0;i<65500;i++);
for(i=0;i<65500;i++);
while(1)
{
if(RCIF)
{
temp1 = RCREG;
Nibble_seperat();
LCD_Display();
}

}

}

void InitialiseAll()
{
OSCCON=0B11100001;
// SPBRG = 25; // 9600 baud @ 8MHz
// TXSTA = 0x24; // setup USART transmit
// RCSTA = 0x90; // setup USART receive
PORTC = 0; // Clear PORTC
TRISC = 0X80; //
// TRISC = 0b11110010;

//
SPBRG=25;
RCSTA=0b10010000;
TXSTA=0b00100100;

T1CON=0X00;
CCP1CON=0X00;
CCP2CON=0X00;

OPTION_REG = 0b10000111; //1:256
ANSEL = 0b00000000;
ANSELH = 0b00000000;
ADCON0 = 0b00000000;
ADCON1 = 0b00000000;
CM1CON0 = 0b00000000;
CM2CON0 = 0b00000000;
INTCON = 0b11010000;
OSCCON = 0b01110001;
PORTA = 0;
TRISA = 0X00;

PORTB = 0;
TRISB = 0b00000000;

PORTD=0;
TRISD=0X00;

PORTE=0;
TRISE=0X00;
WPUB=0B11111111;
GIE=1;
PEIE=1;
}
void Nibble_seperat()
{
for(i=0;i<=2;i++)
{
temp=temp1%10;
temp1=temp1/10;
temp=temp+48;
Message2[9-i]=temp;
}
}


void LCD_Initialliz()
{
LCDDelay(80000);

PORTD=0X3B; // FUNCTION SET 8 BIT 2 LINES 5*8 DISPLAY
LCDDelay(100);

PORTD=0X3B; // FUNCTION SET 8 BIT 2 LINES 5*8 DISPLAY
LCDDelay(100);

PORTD=0X3B; // FUNCTION SET 8 BIT 2 LINES 5*8 DISPLAY
LCDDelay(200);




PORTD=0X0C; // DISPLAY ON
LCDDelay(100);

PORTD=0X01; // CLEAR DISPLAY
LCDDelay(2740);


PORTD=0X05; // ENTRY MODE
LCDDelay(100);


PORTD=0X03; // RETURN HOME
LCDDelay(100);

PORTD=0X17; // DISPLAY SHIFT.
LCDDelay(100);



}
void LCDDelay(unsigned int Delay)
{
ENA = 1;
for(i=0;i<Delay;i++);
ENA = 0;
}
void LCD_Display()
{
PORTD = 0x80; // Send Command to select Line 1
LCDDelay(500);
for(i=0;i<50;i++);
for(DelayCount=0;DelayCount<16;DelayCount++) // Display Line 1
{
RS = 1;
PORTD = Message1[DelayCount];
LCDDelay(500);
RS = 0;
}

PORTD = 0xC0; // Send Command to select Line 2
LCDDelay(500);
for(i=0;i<50;i++);
for(DelayCount=0;DelayCount<16;DelayCount++) // Display Line 2
{
RS = 1;
PORTD = Message2[DelayCount];
LCDDelay(500);
RS = 0;
}
}