Electronic Dice Project

I am doing an electronic dice as a project and i need help.

I want to know how to make a double dice circuit using leds that flash until the dice number has appeared.

Could you please help me because i have no real idea of where to start.

Thanks

here is a picture of one, plus all the parts needed. No schematic though and that sucks.

**broken link removed**

Also, check out these bad dice. Way cool.

http://www.funshop.com/electronicdice.html

well, i can think of a lor of schematics.....try using a counter set to 6 stages, then use diodes to decode the dice....
or use a counter and 7 segment display.....
the concept is to make a counter wich would go trough the 6 numbers fast enough and stpop it in some position......
if u use 2 dices, make sure not to use the same source for the pulsing signal, if u use 2 oscilators, made from a singe ic, like nand gates or whatever, make them so that they have the frequency a littile differents so they wont sincronize.....
i have some chematics, in case u dont find anything on the net, and anice ting that makes the sound of a dice....
**broken link removed**
**broken link removed**
**broken link removed**
and this i think is the simplest
**broken link removed**
http://elektronik.kai-uwe-schmidt.de/digital_wuerfel_en.html
hope i helped somehow

i have a schematic diagram for electronic dice. i can scan it in and email it for you.

can u also send it to me aswell. I know its really late but i really need it

@lfcrulez

You're probably not gonna get much response, as this thread is over 8 years old...