Hmm, as u say Proxxon, I am fabricating a dual use system for full time (hands free) vacuuming when drilling PCBs on my Proxxon MB140/S drill stand (I use an FBS115/E precision drill tool) . Enough FR1 & FR4 dust issues for me. The shop vac is way too noisy for more than a few minutes use.
The unit (5x5x5") will also act as a solder fume handler as it uses an activated carbon filter, 12mm thick
If it works out well I might make a DIY kit out of it.
Right now I am trying to source a 1" or 3/4" corrugated hose for use and plan to install a #12AWG solid buss wire inside the suction tube to make it a flexible gooseneck affair thus permitting positioning for convenient solder fume suction without blocking anything.
The side walls will offer 4 pullout axles for mounting solder spools or wire spools for jobs that require multiple diameter soldering wire.
The front wall of the unit will be completely removable (slideout) for easy emptying.Transparent case .