Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Display for Auna Connect 150 DAB radio

Status
Not open for further replies.

whyld_rabbit

New Member
Hi guys.

I own an Auna Connect 150 DAB radio. The display is broken (only white backlight when the whole radio is powered on), need to replace it. I disassembled the radio to check for part numbers, but the ones I found lead me nowhere - no hits when googling them.
I also contacted the distributor, but with the device being out of warranty, they were not able to help me or provide me with the replacement part ID.

Are you guys able to help?

The markings on the display module are as follow:
- PCB-WK28055V1
- KJ-BL24005CHC-0-Q
- BL2405B-01 16-07-01
- FPCT024SQH-05
- KJ-FPC24001CHC-?-Q
- 2014-07-09
- 61706Y-Y9-24

The display is SPI 240x320 2.4" TFT, 10 pins, physical dimensions ~43x60mm. The board is Venice 6.5 (FS0152-6).
The whole radio is Auna Connect 150 (model 10028154 - see **broken link removed**).

Attaching photos as well:

photo1.jpgphoto2.jpg

If you guys are unable to help me, any hints on where to look / which forum to ask would also be greatly appreciated.

Thanks in advance for any assistance! :)
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top