lilimike
Member
I find I often loose time setting up ICSP, LCD, etc. as well as cleaning up when working with PIC projects on a breadboard.
I've decided to build a small circuit that will integrates
- ICSP (with its capacitor, resistor and diode)
- 16/2 LCD (with its back light resistor, r/w jumper, contrast pot)
- Serial connector (with its resistor)
All will be plugged in via a straight header on the breadboard. I will use Pickit2 to provide power.
Any thing else I should integrate?
Mike
I've decided to build a small circuit that will integrates
- ICSP (with its capacitor, resistor and diode)
- 16/2 LCD (with its back light resistor, r/w jumper, contrast pot)
- Serial connector (with its resistor)
All will be plugged in via a straight header on the breadboard. I will use Pickit2 to provide power.
Any thing else I should integrate?
Mike