Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Developer board for car application

Status
Not open for further replies.

turbo97se

New Member
Hi there

I am not entirely new to micro controllers, but it has been a while since I used/progrrammed one.

I am looking for advice on what would be a good development board to use. I would like a board that can do on-board programming. I also need to do the following:

One input (digital) - need to determine frequency of input

Need three outputs:

1. programmable 0-5 V determined by frequency of digital input
2. 0-1 V Sine wave
3. 0-1 V Sine wave

Can anyone offer advice as to which microcontroller (which PIC) and which development board system would best suit my needs? I would like to be up and running quickly! I can design a dedicated board later.

This is for a car application. The input is a tach signal and the outputs are Mass Air flow (0-5V), and Oxygen sensors (0-1V)

Thanks!
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top