Wait? Under 1v?
That conflicts with info I've found else where while searching for info on faults in these Denon receivers. Where the output voltage should be -/+35-55v. (This was posted by unclejed613 on another forum.)
All the Transistors measure between 47.2v and 50v with the exception of the center channel which is 39.9v to 42.9v.
Q101FR 49.4v, Q103FR 50.1v, Q103FR 49.5v, Q101SR 47.8v, Q103SR 48.7v, Q102SR 47.2v, Q101C 39.9v, Q103C 42.9v, Q102C 40.7v, Q101SL 49.3v, Q103SL 49.3v, Q102SL 48.9v, Q101FL 49.5v, Q103FL 50.0v, Q102FL 49.5v.
Other info is that the voltages at CN511 are all correct as well. The -15v is -14.94, the +15v is +15v, the +24v is 23.9v, and the +5.6v is +5.73v.
I finally found the DC protect circuit/resistors (r115xx) which I'm about to test now, however I have a feeling they're all going to check out fine as well.