Dancin David
New Member
Hmm.. lower value for R1 - even though thats what came with the Kit...?
the LED series has the these stats:
=========
current: 20mA
typ. Voltage: 3.4V
luminosity: 20,000 mcd.
==========
there is a 120 Ohm resistor to run 3 LEDs (when complete will have 18 leds with 6 resistors)
Are you saying that R1 in the kit doesn't suit the Kit or just doesn't suit my LED series?
Also if it is wrong, should it not have worked the first few times?
Thanks again
the LED series has the these stats:
=========
current: 20mA
typ. Voltage: 3.4V
luminosity: 20,000 mcd.
==========
there is a 120 Ohm resistor to run 3 LEDs (when complete will have 18 leds with 6 resistors)
Are you saying that R1 in the kit doesn't suit the Kit or just doesn't suit my LED series?
Also if it is wrong, should it not have worked the first few times?
Thanks again