Controlling CD, DVD by PIC.

P

Peca

New Member

• Jan 17, 2009

• #1

Hi,

has anyone the idea how to send (which) commands to CD (DVD) over it`s rear data connector to force it to open/close door, play music/video, rewind, start from desired track, read data from it etc? Or to link me to sources about it.

I want a lot of things, do I?

Thanks in advance.

Peca.

 

gramo

New Member

• Jan 17, 2009

• #2

Peca said:

has anyone the idea how to send (which) commands to CD (DVD) over it`s rear data connector to force it to open/close door, play music/video, rewind, start from desired track, read data from it etc? Or to link me to sources about it.

Click to expand...

Infrared control? Perhaps make a program to simulate the required control commands

 

AtomSoft

Well-Known Member

• Jan 17, 2009

• #3

lol i dont know if its possible with a pic but here is a start: THE PINOUT

 

Nigel Goodwin

Super Moderator

Most Helpful Member

• Jan 18, 2009

• #4

There have been various examples on the net over the years, but many have since disappeared - basically it's a question of using a PIC with enough I/O, sending commands, and receiving the dta back - the audio itself is taken from the direct audio output on the drive.

A quick google will find examples, eg

PIC/IDE

 

AtomSoft

Well-Known Member

• Jan 18, 2009

• #5

Nice Nigel! Makes me want to learn it

Reading that makes me want to study "PIO (non-DMA) mode" for use with non PIC micros. Like when i get my ARM7 soon!.

so if i was you i would learn about either:
1. PIO (non-DMA) mode
2. DMA Mode

FOUND THIS:
IDE Hard Disk experiments.
https://www.electro-tech-online.com/custompdfs/2009/01/d2015r0-ATAATAPI_Command_Set_-_2_ACS-2.pdf

Good INFO HERE:
ATA (ATA-1)

 

Last edited: Jan 18, 2009

P

Peca

New Member

• Jan 18, 2009

• #6

Thank you all!

You gave me enough material for the begginning. I`ll inform you if I had some results.

Peca.