Continued Reprogramming Probs...
I think I see what you're saying about pull-downs and pull-ups (and yes, I was trying to program in-circuit).
However, even just trying to program the devices alone again are giving me problems. I'm getting:
ICD0161: Verify failed (MemType = Program, Address = 0x7, Expected Val = 0x1683, Val Read = 0x1003)
ICD0275: Programming failed.
Seems that I was able to write to these once, but now I'm having problems. Any chance the device is at fault? The 16F628A is flash, right? Should be programmable multiple times? Thoughts?
-LP