Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Charlieplexed code segment for the Cricket Thermostat

Status
Not open for further replies.
I've posted a small code segment for my Cricket communicating thermostat. This should help understand how the charlieplexed display works.

look for the download link on Updates / March 2006

Bill

www.myblueroom.com

Code:
;Cricket Display 1.0beta written using Tech-Tools assembler CVASM16.6x
;This code segment is for a PIC16F628A but other 14bit PICs should function
;Clarlieplexed display optimized for a 4 digit LED display split on RA0-3 & RB4-7
;Variables:
;Jiffy 	 = byte incremented every 1/256 second and calls routine 64hz refresh per digit 
;Display = Pointer to RAM; Segments to display via INDF 0xxxxxxx (1 = LED / Segment on)
;Temp_A  = Bit Postion then I/O port direction, 0-3 port A, 4-7 port B 
;
;---- Uncomment routine below, make sure it's in the same bank as DispRefresh
;BitMask	jmp	PC+W
;		retw	1,2,4,8,16,32,64,128
;---- End of routine
;  
;Schematic at [url]www.myblueroom.com[/url] see Cricket Communicating Thermostat
;William Richardson 2006
;

DispRefresh	setb  	RP0   			;Bank 1
		or	RA,#00001111b		;turn off all segments Port A
		or	RB,#11110000b		;turn off all segments Port B
          	clrb	RP0   			;Bank 0
		mov	W,Jiffy			;W = 1/256 sec
		and	W,#00000011b		;bits 0-3 only
		mov	FSR,W			;FSR = 0 to 3
		call	BitMask			;convert to Bit Position
		mov	Temp_A,W		;Temp_B = Bit Position
		xor	W,#00001111b		;invert lower nibble only (4 Digits only)
		or	RA,W			;move Output bits to RA 0-3
		or	RB,#11110000b		;RB = 1111xxxx for (4 digits only)
		add	FSR,#Display		;Add offset of Display Pointer
		mov	W,Temp_A		;W = invert Bit Postion
		and	W,Indf			;and with digit segments
		sz				;do we need the float bit?
		or	W,#10000000b		;Disable float bit
		or	W,Temp_A		;or the bit positon
		or	W,Indf			;or the display segments
		not	W			;invert W (0=output, 1=input/float)
		setb	RP0			;bank 1
		mov	Temp_A,W		;Temp_A = W (I/O mask)
		and	W,#00001111b		;mask of high nibble
		and	TRISA,W			;set I/O direction low nibble
		mov	W,Temp_A		;W = Temp_A
		and	W,#11110000b		;keep high nibble
		and	TRISB,W			;set I/O direction high nibble
	       	clrb	RP0   			;bank 0
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top