I can't say I've seen any specific car ones, but there are various projects on the web for using CD-ROM drives as audio CD players, this link uses a PIC16F877 to control it **broken link removed**.
One thing to consider is the environment the CD drive was designed to be used in. Nowadays, most portable CD players feature some kind of anti-skip circuitry. Standard computer CDROM drives are used on a stable surface, and I doubt they have this feature. You may get better results from a portable CD player.
One thing to consider is the environment the CD drive was designed to be used in. Nowadays, most portable CD players feature some kind of anti-skip circuitry. Standard computer CDROM drives are used on a stable surface, and I doubt they have this feature. You may get better results from a portable CD player.
i did that using a creative infra cd rom drive which has all the cd-player button on its face and comes with an optional remote..u simply need to wire from the streo output or analouge output from the rear of the drive into the appropiate circuit of ur cd cassette player amplifier.. if ur car cassette player is equippied with a cd-in jack.. then it would be a breeze to do that :lol:
you are right about the buffer thing.
my cd-rom has 2 buttons to. same as mentioned before. but it is hard to use them...
and i have tried a cd-rom drive ..not in a car, but outside of a computer. i can tell you that it stops at each move, so it is not good for a car, unless you can make some shock absorbers...