capacitors

1st of hi all
can anyone help me i have a CCTV box its an adata LJD 16 Colossus and it keep rebooting, "seem to be ok when it get warm"
i have had a good look at the PCB and have found at least 5 capacitors are loose, i did remove and resoldering them, but it seem its a bad design as the soldering pads are under the capacitors, "if you know what i mean" so if i get some new capacitors with longer legs on i could fit them one the other side so i can get to the pads, leavind the legs a bit longer,
so my question is were can i get some of these capacitors "RM 220uf 10v CD11XK 105c" http://www.rme.cn/enhtml/cd11xk.htm


i have seen these on eBay are any of these a good match?

1..**broken link removed**

2..**broken link removed**

3..**broken link removed**

4..**broken link removed**

5..**broken link removed**


thanks all

any help please

Most of those would be OK. One of those links is for 2200 µF not 220 µF

You can always use a larger voltage if they will physically fit.

RS and Farnell will sell to anyone with a credit card.

o yer 2200uf thanks m8