Hey guys new to the thread here hope to get lots if info and give where I can. Let's get right to it I have a control board that popped what I belive is a capacitor but for the life of me can't figure out what type or capacity it is any help or suggestions is greatly appreciated. Thanks in advance
It may have another line of markings underneath; most likely a three digit number for the value (like resistor values, but for pF)?
"105" is very common one, 0.1uF.
Yea my fluke will measure capacitance and I can always put the board back in the machine and put power to it too see what the voltage is at all the other capacitors