Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Capacitor and transformer question?

Status
Not open for further replies.
The turns ratio is the square root of the impedance ratio:

sqrt(1200/8)=12.25
sqrt(1000/8)=11.18

so your output voltage will be reduced by about 10%.

Remember that the 8 ohm winding is the primary, and that 8 ohms is not the DC resistance of the winding. It is the impedance of the load (speaker) that the transformer was designed for. It will have lower resistance than the secondary.
 
Thanks for the reply on the transformers. What about the capacitor? Would it matter if it is a polyester capacitor or not? The C2-C9s are supost to be polyester capacitors I cant seem to find them but I did find 0.01uF 400VDC ceramic ones.

Thanks again,
Kyle
 
Status
Not open for further replies.

New Articles From Microcontroller Tips

Back
Top