mstechca said:
Ok, tell me what Audioguru is planning on doing at this very second.
Who me? I'm not going to tell you because I am about to live up to what I am called on other forums, a dirty old man! :lol:
After that, I will look at my 6V Ultra-bright Chaser project, which blinks its LEDs very brightly at 24mA, and see where I can fit-in some transistors (maybe on a daughter board) to make the LED current 100mA. I have another LED blinky project that blinks its single ultra-bright LED at 100mA and it looks like a blue or green strobe-light. At 24mA, my chasers beam across the street at night. At 100mA it will beam way down the street. The LEDs blink in sequence for only about 15ms, so they won't be strained. :lol:
Every day for the last couple of weeks I have been painting parts of the model airplane I won. I have also finalized the bunch of timers circuit that will control it. It uses an electic motor with gears for powering its prop.
Maybe CoolBoy can plan a bunch of timers to control a model airplane instead of using radio control:
1) Full power for about 15 seconds (adjustable with a trimpot) for takeoff.
2) Up elevator for about 1 second at about 10 seconds into its takeoff roll.
3) About half-power (adjusted with PWM) for about 1 minute for a gentle climb.
4) About 1/4 power or less for about 1 minute for cruising.
5) About 1/10th power for about 30 seconds for a gentle descent.
6) Cutoff all power when it hits a tree or me! :lol: