I've gathered pretty much all of the parts except for pretty much the two MOST IMPORTANT PARTS, the Inductor and the PCB. Pretty much everywhere I turn, any help about either of these components is pretty much non-existent. I went impulsive and bought a kit online to build my own Inductor unit, but now I don't have the Wire to coil it with and seemingly nowhere to find it. I've went into local radioshacks, hardware stores, hobby stores, and electronics stores, but they're all equally unhelpful past this point.
What I'm specifically looking for is some reference where I could buy the necessary WIRE (38 AWG) and also buy the material for the CIRCUIT BOARD (I plan on printing it out with my Laser printer myself) any thoughts, suggestions, help is greatly appreciated as I've spent enough time on this thing as is - I'd really be happy to finish it and use this Wah Pedal with my Rig!
You can get fine enamelled copper wire from small AC motors (the quiet ones), some fans, from battery analogue alarm clocks etc. Or you can buy it from a shop, e.g. **broken link removed**