bananasiong
New Member
hi all,
i've built this circuit to control the DC motor in both direction. It works well. can anyone tell me is there anything need to be modified?
i've tried using other transistor, 2N3904. but it can't switch. only this TIP41 can switch the relays.
The base of the transistors go to the uC.
00--> forward
11-->reverse
10/01-->stop
i've built this circuit to control the DC motor in both direction. It works well. can anyone tell me is there anything need to be modified?
i've tried using other transistor, 2N3904. but it can't switch. only this TIP41 can switch the relays.
The base of the transistors go to the uC.
00--> forward
11-->reverse
10/01-->stop