Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Ball bearing measurements question

Status
Not open for further replies.

J_Nichols

Member
I was looking at an ebay item and in the title I can read
6809-2Z ZZ
45 x 58 x 7 mm

Nothing strange here. But when I read the description of the item, I find:
D (Outside) 45 mm
d (Inside) Bore 58 mm
B (Width) 7 mm

I don't understand why the bore is bigger than the outside.
I would expected to find this:
D (Outside) 58 mm
d (Inside) Bore 45 mm
B (Width) 7 mm

Can someone explain me if I don't fully understand something? because I've found the same doubt with other ball bearings from china.
 
My SKF dogalogue says that a 6809 is a 45mm bore too.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top