Anyone know of any good circuit snippets that would allow me to filter certain audio frequencies? I am not looking to amplify, only supression. Hopefully something that would be rather simple and easy to compute the frequencies I want to supress. I couldnt find any good web sites about this.
If you don't need any amplification, a simple R-C or L-C band-reject filter will serve the purpose. But for proper impedance matching it is advisable to use operational amplifier based band-reject filter with unity gain.
If you are only wanting certain frequencies to your sub, try this formula
L=R/(2pi*F(highest frequency you want the sub to let through))
L=the inductor you place in series with the + wire on the sub.
R=the impedence of the sub
If you are only wanting certain frequencies to your highs, try this formula
C=1/(2pi*F*R)
C=the capcitor you place in series with the + wire on the tweets.
R=the impedence of the tweet
F=the lowest frequency you want the tweet to let through
If you are only wanting certain frequencies to your mids, do this