• Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Attiny2313 code modding

Status
Not open for further replies.

yurac

New Member
How can I make an ATtiny2313 code copatibel to ATmega8.

Code:


$regfile = "2313def.dat"
$crystal = 4000000
'$noramclear

Config Portb = Output
Config Portd = Input
Portb = &B00000000
Portd = &B00000000

Motor_lp Alias Portb.0
Motor_lt Alias Portb.1
Motor_pp Alias Portb.3
Motor_pt Alias Portb.2

Sensor_p Alias Pind.2
Sensor_s Alias Pind.5
Sensor_l Alias Pind.4


Do
If Sensor_l = 1 And Sensor_s = 0 And Sensor_p = 1 Then 'go along
Gosub Go

Elseif Sensor_l = 0 And Sensor_s = 1 And Sensor_p = 1 Then 'turn left
Gosub Lewt

Elseif Sensor_l = 0 And Sensor_s = 0 And Sensor_p = 1 Then 'turn left
Gosub Lewt


Elseif Sensor_l = 1 And Sensor_s = 1 And Sensor_p = 0 Then 'turn right
Gosub Righ

Elseif Sensor_l = 1 And Sensor_s = 0 And Sensor_p = 0 Then 'turn right
Gosub Righ



End If
Loop


Go:
Motor_lt = 1
Motor_pt = 1
Return
Lewt:
Motor_lt = 0
Motor_pt = 1

Return
Righ:
Motor_lt = 1
Motor_pt = 0

Return
 
Status
Not open for further replies.

Latest threads

EE World Online Articles

Loading
Top