Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Amp and bridge mode for Ipod dock

Status
Not open for further replies.

stuee

Member
Hi,
Im making like a ipod docking unit with amp and speakers and a sub.
Ive found a suitable amp i think

**broken link removed**

4x100w

Is it possible to use this as 1 chan left, 1 chan right and 2 chans to 1 for the sub (bridged)
if so, is there a schematic for me to follow to make it.

Cheers in advance
 
Don't buy a no-name-brand cheap Chinese amplifier from E-Bay.
Its output is 100W into 4 ohms with a horrible-sounding 10% distortion. Its real output is listed at 70W into 4 ohms or only 30W into 8 ohms.
It might be much less.

They don't say if or how it can be bridged. Maybe the Tripath datasheet shows how.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top