Hi,
Im making like a ipod docking unit with amp and speakers and a sub.
Ive found a suitable amp i think
**broken link removed**
4x100w
Is it possible to use this as 1 chan left, 1 chan right and 2 chans to 1 for the sub (bridged)
if so, is there a schematic for me to follow to make it.
Don't buy a no-name-brand cheap Chinese amplifier from E-Bay.
Its output is 100W into 4 ohms with a horrible-sounding 10% distortion. Its real output is listed at 70W into 4 ohms or only 30W into 8 ohms.
It might be much less.
They don't say if or how it can be bridged. Maybe the Tripath datasheet shows how.