Allegro Design Entry - Floating node problem

**** 06/30/13 13:32:00 ***** PSpice 16.6.0 (October 2012) ***** ID# 0 ********

** Profile: "SCHEMATIC1-sim1" [ C:\USERS\RICARDO\DROPBOX\REU\CADENCE\Run2\simulation 2-PSpiceFiles\SCHEMATIC1\sim1.sim ]


**** CIRCUIT DESCRIPTION


******************************************************************************




** Creating circuit file "sim1.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS

*Libraries:
* Profile Libraries :
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Users\Ricardo\AppData\Roaming\SPB_Data\cdssetup\OrCAD_PSpice/16.6.0/PSpice.ini file:
.lib "nom.lib"

*Analysis directives:
.TRAN 0 15u 0 10n
.OPTIONS ADVCONV
.PROBE64 V(alias(*)) I(alias(*)) W(alias(*)) D(alias(*)) NOISE(alias(*))
.INC "..\SCHEMATIC1.net"



**** INCLUDING SCHEMATIC1.net ****
* source SIMULATION 2
V_V3 N03321 N03960
+PULSE -2 20 2u 10n 10n 8u 2000u
V_V1 N03029 GND_POWER 800Vdc
R_R2 N03787 N03029 1 TC=0,0
V_V2 N03960 GND_POWER
+PULSE 0 22 12u 10n 10n 2u 2000u
C_C1 GND_POWER N03787 2m TC=0,0
L_L1 N03329 N03713 856uH
R_R1 N03029 N03129 0.5 TC=0,0
R_R3 N03713 N03129 0.3 TC=0,0
R_R4 N03321 N03994 6 TC=0,0
D_D1 N03329 N03129 D10D2

**** RESUMING sim1.cir ****
.END

ERROR(ORPSIM-15141): Less than 2 connections at node N03994.

ERROR(ORPSIM-15142): Node N03321 is floating

ERROR(ORPSIM-15142): Node N03960 is floating

ERROR(ORPSIM-15142): Node N03029 is floating

ERROR(ORPSIM-15142): Node GND_POWER is floating

ERROR(ORPSIM-15142): Node N03787 is floating

ERROR(ORPSIM-15142): Node N03329 is floating

ERROR(ORPSIM-15142): Node N03713 is floating

ERROR(ORPSIM-15142): Node N03129 is floating

ERROR(ORPSIM-15142): Node N03994 is floating

Click to expand...