switching...
This is a 'WARNING BELL/RED-LIGHT' system for a sound stage. There are several strobe and rotating lights and bells(all 120vac) positioned around the building, each wired with 14 ga THHN. The lights and bells are up to 300 feet apart, and are controlled separately by remote switches, which are themselves on a very long cable (up to 250 ft). What I want is an alternative switching method to control the lights and bells, similar to a light dimmer control board, but without the dimmer function. By alternative, I mean not having to use several hundred feet of 14 x 4 SJO cable because it is expensive and heavy!! And it adds to the voltage drop. The bells are momentary, and draw negligable current. My estimation of 10 Amps is safely high for the combined load. Thanks!