Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

ADC Problem with AVR

Status
Not open for further replies.
A

ahmedragia21

Member
Hi, Im trying to drive a servo using a 10k POT using software PWM , everything works , except that the pot's voltage gets cut at the first 10% of the position of the pot , like when i increase slowly its gets from 1V to suddenly 4V ! , not 1.5, 2 , 3 V .. I even put an OP-AMP LM324 As a buffer and it doesnt work , when i test the pot alone , it gets the correct voltage propotional to my rotation of the pot. what could be the problem ?
 
Status
Not open for further replies.

Similar threads

S
  • Question
Ds1307 RTC Power Problem with battery
Replies
12
Views
3K
fourtytwo
F
S
  • Question
DS1307 RTC Problem with Unplugging Power Supply
Replies
10
Views
3K
Nigel Goodwin
Nigel Goodwin
W
  • Question
C18 problem
Replies
10
Views
1K
Nigel Goodwin
Nigel Goodwin
S
  • Question
problem with reciving answer from sim800
Replies
2
Views
2K
STP.Asghari
S
S
  • Question
Some Problems with DS1307 RTC
Replies
3
Views
3K
Saeedk9574
S

Latest threads

New Articles From Microcontroller Tips

Back
Top