What is the battery voltage?
You have an attenuator from the battery voltage to the input of an opamp.
The opamp has a supply voltage of 5v, if the battery voltage is greater than 7.xx volts the opamp will saturate and the output will go to the +ve rail.
How are you measuring the battery current?
Where is the sense resistor?
I do not understand how the current measurement circuit is supposed to work.
I don't see PV_I in the schematic. As a matter of fact I don't see any negative voltage in the schematic. You may need to draw the battery and charger into the diagram along with all voltages.
I don't see PV_I in the schematic. As a matter of fact I don't see any negative voltage in the schematic. You may need to draw the battery and charger into the diagram along with all voltages.
Please find the schematic attached..... if any thing wrong please guide me i am getting negative voltages on current sensing channel (PV_I ) while charging