Is it possible to modify this circuit to incorporate a thermistor, so the speed of a AC motor can be controlled by temperature. At room temperature I would like the motor to spin at around 30-40% of it's rated speed. As the temp increases by 20 degrees or so the fan should increase to about 80% of it's rated speed.
In this case the bridge output not contain a condenser, so the SCR can commutate.This is a primitive full-wawe splitter, but not working properly with AC motors.
In this case the bridge output not contain a condenser, so the SCR can commutate.This is a primitive full-wawe splitter, but not working properly with AC motors.