Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

A heater rated at 2.5KW

Status
Not open for further replies.

Heidi

Member
Dear friends,

I have a question while I'm studying power in AC circuits. What does it mean by saying 'a heater rated 2.5KW'?

Does it mean that a rms current of I=2500/120 will flow into the heater when it is plugged into a V(rms)=120V socket? And a curent of I=2500/240 will flow into when plugged into a V=240V socket? Is 2.5KW the average power that the heater consumes?

Why is that? I thohght a heater could be treated like a resistor, how can the average power consumed be known before we know about the resistance or impedance of a resistor or equipment?

Thank you!
 
Why is that? I thohght a heater could be treated like a resistor, how can the average power consumed be known before we know about the resistance or impedance of a resistor or equipment?
The heater is like a resistor. The power rating will be for a certain voltage input.

e.g. if it's 2.5kW @ 120 vac, then it will output 10kW @ 240VAC (and likely burn out).
 
Sorry, Nigel, I was going to click on the "+" sign, wrong click but I don't know how to change it back :(
 
The heater is like a resistor. The power rating will be for a certain voltage input.

e.g. if it's 2.5kW @ 120 vac, then it will output 10kW @ 240VAC (and likely burn out).
The full calculations :

Using V=IR and P=IV etc .....

2.5kw@120v = 20.83A
R=V/I = 120/20.83=5.76R element resistance

Plugging this into a 240v source:

I=V/R = 240v/5.76R = 41.6A
P=I*V = 240*41.6=9998.4 watts
 
The full calculations :

Using V=IR and P=IV etc .....

2.5kw@120v = 20.83A
R=V/I = 120/20.83=5.76R element resistance

Plugging this into a 240v source:

I=V/R = 240v/5.76R = 41.6A
P=I*V = 240*41.6=9998.4 watts
Actually, it's exactly 10,000 Watts, assuming constant resistance.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top