If i have 2 strings of LED's that are hooked to diffferent switches. To turn one on then flick the switch and turn the other on.
Can i use a common ground for both strings?
Or will it screw the LED's up that are switched off while the other string is on?
Here is my lil diagram to help.
+ (0) - 0 +
+ = positive
- = negative
0 = led
(0) = powered / lit up led
Thanks in advance.
Can i use a common ground for both strings?
Or will it screw the LED's up that are switched off while the other string is on?
Here is my lil diagram to help.
+ (0) - 0 +
+ = positive
- = negative
0 = led
(0) = powered / lit up led
Thanks in advance.