Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

18f4550 mikroC usb 20Mhz config settings.

Status
Not open for further replies.
Those config settings will set the 18F4550 up using a 20MHz crystal, running the CPU at 48MHz (12MIPS).

I answered that way because I was unsure if you wanted the CPU to run at 20MHz or you want to use a 20MHz crystal.
 
Last edited:
ye,
i want to run the HID example with this configuration,
But i when i connect the PIC burnt with this config, the device manager says, USB device cannot be started.....
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top